Knowledge Base & Discussion Forum

ISSUE:"Failed to mkdirs, path: settings, (com.ahsay.afc.cloud.d: [RpsManager.list] Failed to list path: . Reason: Precondition Failed)" error is shown on AhsayCBS when enabling replication to another AhsayCBS server (5269)

ISSUE:"Failed to mkdirs, path: settings, (com.ahsay.afc.cloud.d: [RpsManager.list] Failed to list path: . Reason: Precondition Failed)" error is shown on AhsayCBS when enabling replication to another AhsayCBS server (5269)

Postby admin » Fri Aug 11, 2017 3:13 pm

Article ID: 5269
Reviewed: 12/08/2017

Product Version:
AhsayCBS: 7.13.0.0 or above
OS: All platforms

Problem Description:
When enabling replication to another AhsayCBS server the following error is shown on the AhsayCBS web console when saving the settings "Failed to mkdirs, path: settings, (com.ahsay.afc.cloud.d: [RpsManager.list] Failed to list path: . Reason: Precondition Failed)"

RPS-preconditionsfailed.png

Cause:
The following issues will cause this error:
 
  1. The replication receiver does not exists on the AhsayCBS (replication) server.
  2. The replication receiver on the AhsayCBS (replication) server is not enabled.
  3. The replication receiver login credentials entered are incorrect.
  4. The port number for "Replicate v6 backup sets to v7 server" is incorrect or the "Enable V6 Backup Sets Replication" setting is not enabled on the AhsayCBS (replication) server.
Resolution:
To resolve:

Issue 1:
  1. Login to the AhsayCBS (replication) web console
  2. Go to [Backup / Restore]>[Accepting Data]>[Receiver]>[Manage Receiver] and create a receiver.

Issue 2:
  1. Login to the AhsayCBS (replication) web console.
  2. Go to [Backup / Restore]>[Accepting Data]>[Receiver]>[Manage Receiver] and select the replication receiver.
  3. Click on "Enable Replication" and save setting.

Issue 3:
  1. Re-enter the correct replication receiver login credentials.

Issue 4:
  1. Login to the AhsayCBS (replication) web console.
  2. Go to [Backup / Restore]>[Accepting Data]>[Receiver]>[Manage Receiver] and select the replication receiver.
  3. Verify the "Enable V6 Backup Sets Replication" setting is enabled and the port number is set correctly.

Keywords:
replication, sender, replicating, rps, receiver, login, enable receiver
admin
Site Admin
 
Posts: 964
Joined: Mon Jul 10, 2006 3:19 pm

Return to AhsayRPS

Who is online

Users browsing this forum: No registered users and 1 guest